Need help troubleshooting s17 pro

I just got an s17 pro and I can't get it to work right. It keeps shutting off after about 5 to 15 minutes. Here’s the error message I keep seeing. Any help would be awesome! [2021/08/05 00:19:57] INFO: Power ON [2021/08/05 00:19:59] INFO: Starting FPGA queue [2021/08/05 00:19:59] INFO: Initializing hash boards [2021/08/05 00:19:59] INFO: chain[2] Initializing [2021/08/05 00:19:59] INFO: chain[1] Initializing [2021/08/05 00:19:59] INFO: chain[0] Initializing [2021/08/05 00:20:14] INFO: chain[2] 48 chips detected [2021/08/05 00:20

Sounds like your power supply might be toast. Do you have the right voltage, like between 210 and 240 volts? If you do, try taking it apart and see if running just one hash board helps. If that works, you can add more one at a time. But honestly, if the PSU is dying, good luck finding a new one, they’re super hard to get.

+1 on the power supply being the issue. I’ve seen this happen before. If it’s underpowered, it might run for a bit and then just shut off. It's not guaranteed that it’ll work with one or two boards, but it's worth a shot.